February 25, 2009
An estimated 1,000 gallon sewage spill occurred Wednesday morning at the 200 – 300 block of Harbor Drive South in Oceanside. The spill, which was caused by grease blockage on a sewer line main, started 6:35 a.m. and ended at 8:15 a.m. when crews from the City of Oceanside removed the blockage.
Crews were able to recover approximately 400 gallons of sewage; the remaining 600 gallons flowed into a storm drain leading to Oceanside Harbor.
Signs warning of sewage contamination are posted at harbor access ways and will remain posted for at least 72 hours.
 Email Updates Get County news and information delivered to your inbox
|
